- Joined
- Jun 16, 2014
- Messages
- 51
- Reaction score
- 12
- Points
- 8
8 Common Hitting Mistakes (And How To Correct Them)
Hitting a softball is arguably one of the hardest techniques to master, in any sport.
Even after players learn and understand the basic mechanics of the swing, it’s very common for them to develop bad habits that hamper their hitting effectiveness.
As coaches, we need to be able to identify these bad habits, and make the necessary mechanical adjustments to guarantee that player’s success.
In this article, we will cover eight of the most common hitting mistakes you will find at all levels of play. You’ll learn exactly what causes the mistake, and how to correct it with simple, effective hitting drills that can be performed during team batting practice, or private hitting workouts.
Recommended Resource: Hitting Faults and Fixes Ebook
if you'd like to get more detailed explanations of all these hitting mistakes, check out the Hitting Faults and Fixes eBook.
You'll get step by step instructions and illustrations for all 22 drills. Along with simple coaching pointers to speed up your learning curve and accelerate your improvement!
Download Hitting Faults and Fixes today!
Mistake #1 - Uppercutting or Dipping
The Mistake
Mistake #2 - Stepping Out or Flying Out
The Mistake
Mistake #3 - Head Jumping (No Backside Hitting)
The Mistake
Mistake #4 - Poor Ball Tracking
The Mistake
Mistake #5 - Slow Bat
The Mistake
Mistake #6 - Poor Hand Position at Contact
The Mistake
Mistake #7 - Locking Out the Arms
The Mistake
Mistake #8 - Poor Balance
The Mistake
Source:
https://www.softball-spot.com/hitting-mistakes/3523/
Hitting a softball is arguably one of the hardest techniques to master, in any sport.
Even after players learn and understand the basic mechanics of the swing, it’s very common for them to develop bad habits that hamper their hitting effectiveness.
As coaches, we need to be able to identify these bad habits, and make the necessary mechanical adjustments to guarantee that player’s success.
In this article, we will cover eight of the most common hitting mistakes you will find at all levels of play. You’ll learn exactly what causes the mistake, and how to correct it with simple, effective hitting drills that can be performed during team batting practice, or private hitting workouts.
Recommended Resource: Hitting Faults and Fixes Ebook
if you'd like to get more detailed explanations of all these hitting mistakes, check out the Hitting Faults and Fixes eBook.
You'll get step by step instructions and illustrations for all 22 drills. Along with simple coaching pointers to speed up your learning curve and accelerate your improvement!
Download Hitting Faults and Fixes today!
Mistake #1 - Uppercutting or Dipping
The Mistake
- Hitter dips her back shoulder, drops the barrel down and swings from low to high
- Results in loss of power and weak pop flies
- Keep shoulders level
- Bring the hands down to the ball during the swing
- Hammer Drill – Top Hand
- Hammer Drill – Bottom Hand
- Hammer Drill – Both Hands
- Tee Chair Drill
Mistake #2 - Stepping Out or Flying Out
The Mistake
- Hitter’s stride foot opens up so her toe points to pitcher. Shoulder and head open up early
- Results in loss of power, difficulty hitting outside pitch
- Head movement makes pitch tracking difficult
- Keep stride foot semi-closed – toes pointing at an angle toward first base.
- Keep head still, lead shoulder and elbow tight to the body
- Ping Pong Paddle Drill
- Outside Soft Toss Drill
Mistake #3 - Head Jumping (No Backside Hitting)
The Mistake
- Head shoots forward during swing
- Head movement makes pitch tracking difficult
- “No backside” arms-only swing – no power from hips or back leg
- Isolate the head and keep it still
- Create strong backside force by driving the back hip in to the ball and rotating off the back foot
- Attack Drill
- Fastball Curveball Bounce Drill
- No Stride Batting Drill
- Stride-Backside-Hands Drill
- Medicine Ball Drill
- Figure 8 Partner Drill
Mistake #4 - Poor Ball Tracking
The Mistake
- Player is unable to track the ball out of the pitcher’s hand
- Results in inability to identify the pitch, decide whether to swing, or watch the ball meet the bat
- Fine focus on the ball at the pitcher’s release point.
- Improve perception and tracking skills with drill work
- Pinto Bean Drill
- Release Point Drill
- Color Ball Drill
- Hit or Get Hit Drill
Mistake #5 - Slow Bat
The Mistake
- Sluggish reaction time to the pitch (ie. poor bat speed)
- Results in difficulty with higher velocity fastballs and loss of power
- Improve hands, hips and reaction time through strength training, isometrics and cage work
- Hard Toss Drill
- Weighted Bat Swing Drill
- Isometric Swing Training
Mistake #6 - Poor Hand Position at Contact
The Mistake
- Hands are tilted diagonally at contact point or top hand rolls over prematurely
- Results in barrel of bat being dipped above or below ball – leading to weak pop files or ground balls
- Hands should be palm-up/palm-down at contact point
- Tee Challenge Drill
- Soft Toss Challenge Drill
Mistake #7 - Locking Out the Arms
The Mistake
- Front arm is fully extended and elbow is locked out throughout entire swing, creating a slow, sweeping or casting swing.
- Also results in difficulty hitting inside pitch
- Front arms should have slight bend at the elbow and hands should stay inside the ball
- Fence Drills
Mistake #8 - Poor Balance
The Mistake
- Diving into the plate or falling back away from the pitch
- Results in loss of power and difficulty making in-pitch adjustments
- Take a smaller stride
- Maintain balance through the swing
- 2×4 Balance Drill
Source:
https://www.softball-spot.com/hitting-mistakes/3523/